Replacement Water Filters Pentek C-1 9.75 In. X 2.5 In. Carbon Water Filter

This Pentek C-1 carbon filter cartridge reduces fine sediment and chlorine taste and odor in residential drinking water. It has a nominal (85%) filtration rating of 5 microns, and will reduce free available chlorine (FAC) at 2 PPM by at least 75% in up to 2500 Gal. at a recommended flow rate of 1 GPM. This cartridge is made of cellulose media impregnated with powdered activated carbon (PAC), reinforced by polyester backing and netting for strength and dirt-holding capacity. The nitrile butadiene rubber (Buna-N) gasket seals the cartridge against the housing (sold separately). The cartridge has an initial pressure drop of 4 psi at a flow rate of 5 GPM, and it operates over a temperature range of 40°F to 125°F (4.4°C to 51.7°C). This filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various applications, including drinking water purification, laboratory water treatment, and film processing, among others.

• Reduces fine sediment and chlorine taste and odor in residential drinking water
• Nominal filtration rating of 5 micron
• Carbon-impregnated cellulose media with polyester backing and netting for strength and dirt-holding capacity
• Initial pressure drop of 4 psi at a flow rate of 5 GPM
• Temperature range of 40°F to 125°F (4.4°C to 51.7°C)