Water Filtration Systems Pentek 150237 1 In. Whole House Filter System

This Pentek 150237 1 in. #10 Big Blue filter housing with pressure relief is suitable for high-flow and heavy sediment applications. The opaque blue sump is made of reinforced polypropylene for strength and resistance to chemicals, and the black cap is made of high-flow polypropylene (HFPP) for stiffness. The black cap has 1 in. female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 10 in. x 4-1/2 in. filter cartridge. It has an initial pressure drop of 1 psi at a flow rate of 15 GPM, a maximum operating pressure of 100 psi, and a maximum operating temperature of 100°F (37.8°C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various high-flow applications, including residential drinking water filtration, food service and irrigation, among others.

• Large filter housing for high-flow and heavy sediment applications
• Reinforced polypropylene sump for strength and chemical resistance
• Use with a 10 in. x 4-1/2 in. filter cartridge (sold separately)
• Pressure relief button for easier cartridge replacement
• Initial pressure drop of 1 psi at a flow rate of 15 GPM